Lethal metabolism of Candida albicans respiratory mutants.

The destructive impact of fungi in agriculture and animal and human health, coincident with increases in antifungal resistance, underscores the need for new and alternative drug targets to counteract these trends. Cellular metabolism relies on many intermediates with intrinsic toxicity and promiscuous enzymatic activity generates others. Fuller knowledge of these toxic entities and their generation may offer opportunities of antifungal development. From this perspective our observation of media-conditional lethal metabolism in respiratory mutants of the opportunistic fungal pathogen Candida albicans was of interest. C. albicans mutants defective in NADH:ubiquinone oxidoreductase (Complex I of the electron transport chain) exhibit normal growth in synthetic complete medium. In YPD medium, however, the mutants grow normally until early stationary phase whereupon a dramatic loss of viability occurs. Upwards of 90% of cells die over the subsequent four to six hours with a loss of membrane integrity. The extent of cell death was proportional to the amount of BactoPeptone, and to a lesser extent, the amount of yeast extract. YPD medium conditioned by growth of the mutant was toxic to wild-type cells indicating mutant metabolism established a toxic milieu in the media. Conditioned media contained a volatile component that contributed to toxicity, but only in the presence of a component of BactoPeptone. Fractionation experiments revealed purine nucleosides or bases as the synergistic component. GC-mass spectrometry analysis revealed acetal (1,1-diethoxyethane) as the active volatile. This previously unreported and lethal synergistic interaction of acetal and purines suggests a hitherto unrecognized toxic metabolism potentially exploitable in the search for antifungal targets.

Selective Peptide Cysteine Manipulation on Demand and Difficult Protein Chemical Synthesis Enabled by Controllable Acidolysis of N,S-Benzylidene Thioacetals.

Although solid-phase peptide synthesis combining with chemical ligation provides a way to build up customized polypeptides in general, many targets are still presenting challenges for the conventional synthetic process, such as hydrophobic proteins. New methods and strategies are still required to overcome these obstacles. In this study, kinetic studies of Cys/Pen ligation and its acidolysis were performed, from which the fast acidolysis of substituted N,S-benzylidene thioacetals (NBTs) was discovered. The study demonstrates the potential of NBTs as a promising Cys switchable protection, facilitating the chemical synthesis of peptides and proteins by efficiently disrupting peptide aggregation. The compatibility of NBTs with other commonly adopted Cys protecting groups and their applications in sequential disulfide bond formation were also investigated. The first chemical synthesis of the native human programmed death ligand 1 immunoglobulin V-like (PD-L1 IgV) domain was achieved using the NBT strategy, showcasing its potential in difficult protein synthesis.

Catalyst-free readily dual-recyclable acetal-based covalent adaptable cellulose networks.

Despite covalent adaptable networks (CANs) imparting the favorable features of crosslinked polymers, as well as the functionality of reprocessing, reshaping and welding, due to exchange reaction enabled topology changes; it is still a huge challenge to design catalyst-free, fast reprocessing, controlled degradation and polymer recyclable biomass base CANs. Herein, for the first time, acetal-based covalent adaptable cellulose networks (ACCs) were utilized to synthesize readily reconstructable cellulose-based thermosets with mechanical tunability. ACCs were synthesized via catalyst-free "click" addition of cellulose and divinyl ether without releasing small molecule byproducts. Different crosslinking densities and crosslinkers were used to explore the structure-property relationship, the mechanical and thermal properties of the ACCs were strongly influenced by these factors. ACCs can obtain enhanced tensile strength or elongation at break by changing the structure of the crosslinker. Furthermore, the reworking, welding and shape memory properties of these ACCs, based on the dynamic exchange reaction of acetal bonds, were investigated. In addition, these ACCs can be degraded under acidic conditions, and closed-loop utilization of polymer was possible. Thus, ACCs can be mechanically and chemically double-cycled, which will contribute to solving the white pollution problem and resource waste as a new class of sustainable plastics.

Effects of sunflower oil infusions of Asparagopsis taxiformis on in vitro ruminal methane production and biohydrogenation of polyunsaturated fatty acids.

Asparagopsis taxiformis inhibits ruminal methane (CH4) production due to its bromoform (CHBr3) content. The immersion of A. taxiformis in edible vegetable oils allows the extraction and stabilization of the highly volatile CHBr3 in the oil phase. The objectives of this study were to explore the effects of adding sunflower oils with increasing concentrations of CHBr3 on in vitro ruminal methanogenesis and biohydrogenation. Five batches of 48-h in vitro incubations were performed in 14 fermentation bottles, using rumen inocula collected shortly after the slaughter of young crossbred bulls and 1 g of dry matter (DM) from a total diet of mixed feed without added oil (control) or with 60 µL of sunflower oil per gram of DM as the substrate. The treatments were the CHBr3 content in the oil added: 0 µg (B0), 25 µg (B25), 50 µg (B50), 75 µg (B75), 100 µg (B100), and 150 µg (B150) of CHBr3 per gram of substrate DM. Organic matter (OM) degradability, total gas, CH4, volatile fatty acids (VFA), long-chain fatty acids, and dimethyl acetals (DMA) were analyzed at the end of each incubation. Data were analyzed with a model considering the treatments as the fixed effect and the run as a random block and using orthogonal contrasts. Degradability of OM was higher in the control group and was unaffected by CHBr3 concentration. Total gas production per gram of degraded OM was unaffected by treatments and averaged 205 ± 29.8 mL/g. Methane (mL) production decreased linearly with increasing CHBr3 concentrations, with 33%, 47%, and 87% reductions for B75, B100, and B150, respectively. Total VFA concentration was unaffected by oil inclusion but was reduced by 20% in CHBr3-containing treatments, although without any dose-response pattern. The molar percentage of acetate decreased linearly, whereas propionate and butyrate increased linearly with the increasing CHBr3 dosage. Including oil in the diet decreased the branched-chain fatty acids and DMA content. Increasing CHBr3 concentrations did not affect branched-chain fatty acids, but linearly increased most of the identified DMA. Adding oil to the control diet increased the 18:2n-6, whereas increasing the concentration of CHBr3 had no effect on 18:2n-6 but decreased linearly the 18:0 and increased the trans-18:1 isomers. The results obtained provide evidence that oil immersions of A. taxiformis can successfully inhibit ruminal production of CH4 in vitro at doses of 100 and 150 µg/g DM, and simultaneously modulate biohydrogenation.

Acetal Formation of Flavoring Agents with Propylene Glycol in E-Cigarettes: Impacts on Indoor Partitioning and Thirdhand Exposure.

The widespread use of flavored e-cigarettes has led to a significant rise in teenage nicotine use. In e-liquids, the flavor carbonyls can form acetals with unknown chemical and toxicological properties. These acetals can cause adverse health effects on both smokers and nonsmokers through thirdhand exposure. This study aims to explore the impacts of these acetals formed in e-cigarettes on indoor partitioning and thirdhand exposure. Specifically, the acetalization reactions of commonly used flavor carbonyls in laboratory-made e-liquids were monitored using proton nuclear magnetic resonance (1H NMR) spectroscopy. EAS-E Suite and polyparameter linear free energy relationships (PP-LFERs) were employed to estimate the partitioning coefficients for species. Further, a chemical two-dimensional partitioning model was applied to visualize the indoor equilibrium partitioning and estimate the distribution of flavor carbonyls and their acetals in the gas phase, aerosol phase, and surface reservoirs. Our results demonstrate that a substantial fraction of carbonyls were converted into acetals in e-liquids and their chemical partitioning was significantly influenced. This study shows that acetalization is a determinant factor in the exposure and toxicology of harmful carbonyl flavorings, with its impact extending to both direct exposure to smokers and involuntary exposure to nonsmokers.

Evaluation of polymethyl-methacrylate and acetal denture base resins processed by two different techniques before and after nano-chlorohexidine surface treatment.

BACKGROUND: Flexible denture base polymers have gained popularity in modern dentistry however, their biofilm formation tendency, adversely affecting the oral tissue heath, remains a concern. Consequently, this study aimed to evaluate surface roughness and biofilm formation tendency of two types of denture base resins manufactured with two techniques before and after surface coating with chlorohexidine (CHX) NPs. MATERIALS AND METHODS: Acetal (AC) and Polymethyl-methacrylate (PMMA) resins manufactured by conventional and CAD/CAM methods were shaped into disk (10 X 10 X 1 mm). They were dipped for 8 h and 24 h in colloidal suspension prepared by mixing aqueous solution of CHX digluconate and hexa-metaphosphate (0.01 M). Surface roughness, optical density (OD) of microbial growth media and biofilm formation tendency were evaluated directly after coating. Elutes concentrations of released CHX were evaluated for 19 days using spectrophotometer. Three-way ANOVA and Tukey's post-hoc statistical analysis were used to assess the outcomes. RESULTS: AC CAD/CAM groups showed statistically significant higher roughness before and after coating (54.703 ± 4.32 and 77.58 ± 6.07 nm, respectively). All groups showed significant reduction in OD and biofilm formation tendency after surface coating even after 19 days of CHX NPs release. CONCLUSIONS: Biofilm formation tendency was highly relevant to surface roughness of tested resins before coating. After CHX NPs coating all tested groups showed significant impact on microbial growth and reduction in biofilm formation tendency with no relation to surface roughness. Significant antimicrobial effect remained even after 19 days of NPs release and specimens storage.

Exploration of the Linkages between Lignin and Carbohydrates in Kraft Pulp from Wheat Straw Using a 13C/2H Isotopic Tracer.

To further our understanding of the change in association between lignin and carbohydrates after kraft pulping, isotope-labeled kraft pulp (KP) was prepared using 13C and D double-isotope-labeled wheat straw, and it was subjected to enzymatic hydrolysis and ionic liquid treatment to explore the linkages between lignin and carbohydrate complexes in wheat straw. Isotope abundance determination showed that 13C and D abundances in the experimental groups were substantially higher than those in the control group, indicating that the injected exogenous coniferin-[α-13C], coniferin-[γ-13C], and d-glucose-[6-D2] were effectively absorbed and metabolized during wheat internode growth. Solid-state CP/MAS 13C-NMR spectroscopy showed that lignin was mainly linked to polysaccharides via acetal, benzyl ether, and benzyl ester bonds. Kraft pulp (KP) from the labeled wheat straw was degraded by cellulase. The obtained residue was fractionated using the ionic liquid DMSO/TBAH to separate the cellulose-lignin complex (KP-CLC) and xylan-lignin complex (KP-XLC). X-ray diffractometer determination showed that the KP-CLC regenerated cellulose type II from type I after the ionic liquid conversion. The 13C-NMR spectrum of Ac-En-KP-CLC showed that the cellulose-lignin complex structure was chemically bonded between the lignin and cellulose through acetal and benzyl ether bonds. The 13C-NMR spectrum of En-KP-XLC showed a lignin-hemicellulose complex structure, wherein lignin and xylan were chemically bonded by benzyl ether and acetal bonds. These results indicate that the cross-linking between lignin and carbohydrates exists in lignocellulosic fibers even after kraft pulping.

N,O-Benzylidene Acetal Dipeptides (NBDs) Enable the Synthesis of Difficult Peptides via a Kinked Backbone Strategy.

Proteins with highly hydrophobic regions or aggregation-prone sequences are typically difficult targets for chemical synthesis at the current stage, as obtaining such type of peptides via solid-phase peptide synthesis requires sophisticated operations. Herein, we report N,O-benzylidene acetal dipeptides (NBDs) as robust and effective building blocks to allow the direct synthesis of difficult peptides and proteins via a kinked backbone strategy. The effectiveness and easy accessibility of NBDs have been well demonstrated in our chemical syntheses of various challenging peptides and proteins, including chemokine, therapeutic hormones, histone, and glycosylated erythropoietin.

Design of Cationic Lipids with Acetal Linkers: Conformational Preferences, Hydrolytic Stability, and High Drug-Loading Abilities.

Lipids are key constituents of numerous biomedical drug delivery technologies. Here, we present the design, synthesis and biophysical characterizations of a library of cationic lipids containing an acetal residue in their linker region. These cationic acetal lipids (CALs) were conveniently prepared through a trans-acetalization protocol from commercially available precursors. NMR studies highlighted the conformational rigidity at the acetal residue and the high hydrolytic stability of these CALs. Fluorescence anisotropy studies revealed that the CAL with a pyridinium headgroup (CAL1) formed highly cohesive vesicular aggregates in water. These structural and self-assembly features of the CAL1 allowed up to 196 % w/w loading of curcumin (Cur) as a representative hydrophobic drug. A reconstitutable formulation of Cur was obtained as a result, which could deliver the drug inside mammalian cells with very high efficiency. The hemocompatibility and cytocompatibility of CAL1 was significantly enhanced by creating a coating of polydopamine (PDA) onto its vesicular assemblies to produce hybrid lipid-polymer nanocapsules. This work demonstrates rapid access to the useful synthetic lipid formulations with high potential in drug and gene delivery applications.

Shell-Sheddable Polymeric Micelles Alleviate Oxidative Stress and Inflammation for Enhanced Ischemic Stroke Therapy.

As a ROS scavenger, resveratrol exerts a neuroprotective effect by polarizing the M1 microglia to the anti-inflammatory M2 phenotype for ischemic stroke treatment. However, the obstruction of the blood-brain barrier (BBB) seriously impairs the efficacy of resveratrol. Herein, we develop a stepwise targeting nanoplatform for enhanced ischemic stroke therapy, which is fabricated by pH-responsive poly(ethylene glycol)-acetal-polycaprolactone-poly(ethylene glycol) (PEG-Acetal-PCL-PEG) and modified with cRGD and triphenylphosphine (TPP) on a long PEG chain and a short PEG chain, respectively. The as-designed micelle system features effective BBB penetration through cRGD-mediated transcytosis. Once entering the ischemic brain tissues and endocytosed by microglia, the long PEG shell can be detached from the micelles in the acidic lysosomes, subsequently exposing TPP to target mitochondria. Thus, the micelles can effectively alleviate oxidative stress and inflammation by enhanced delivery of resveratrol to microglia mitochondria, reversing the microglia phenotype through the scavenging of ROS. This work offers a promising strategy to treat ischemia-reperfusion injury.

Comprehensive characterization of volatile and semi-volatile compounds in e-liquids for electronic cigarette using gas chromatography accurate mass spectrometry.

The consumption of electronic cigarettes is a habit with an increasing prevalence, particularly among youths. Knowing the composition of e-liquids used in these devices represents the first step to understand the potential impact of e-smoking in the health of consumers. Herein, a non-target screening methodology was applied to the identification of volatile and semi-volatile compounds in a set of e-liquids from different suppliers, with different flavors, and containing different kinds of additives, such as nicotine or cannabidiol. To this end, samples were characterized by gas chromatography accurate mass spectrometry, using a time-of-flight mass analyzer. Combination of deconvoluted electronic ionization mass spectra with linear retention index values, obtained for two columns with different selectivity, permitted the identification of more than 250 chemicals with different confidence levels. Among them, respiratory pro-inflammatory compounds, acetals of propylene glycol and glycerin with aldehydes, nicotine-related and non-related alkaloids, and psychoactive cannabinoids were confirmed as concerning compounds in e-liquid samples. Concentration ratios between propylene glycol acetals and parent aldehydes varied in the range from 2% (ethyl vanillin) to more than 80% (case of benzaldehyde). The ratios between the concentrations of delta-9-tetrahydrocannabinol and cannabidiol in e-liquids stayed in the range from 0.02% to 0.3%.

Pseudo-Enantiomeric Paraphaeolactones and Their Biosynthetic Derivatives from Paraphaeosphaeria sp. KT4192: A Proposition of a Favorskii Rearrangement for Their Biosynthesis.

Paraphaeolactones A1, A2, B1, and B2 (1-4, respectively), known arthropsadiol D (5), massariphenone (6) and its positional isomer 7, and massarilactones E (8) and G (9) were isolated from the culture broth of Paraphaeosphaeria sp. KT4192. Although the structural resemblance between 1 and 2 implies that these comprised a diastereomeric pair at the C-2 stereogenic center, electronic circular dichroism (ECD) spectral analyses revealed that they were pseudo-enantiomers possessing the common (2R)-configuration. Paraphaeolactones B1 and B2 (3 and 4) were the derivatives of 2, which equipped the 3-(1-hydroxy-2-oxopropyl)-4-methylcatechol moiety via an acetal bond at C-10. The relative configurations of their acetal carbons were elucidated by NOE experiments, and those of C-8' were deduced independently by ECD spectral analysis. The present study disclosed that 1-5, 8, and 9 contain a methylcyclohexene substructure with the same absolute configuration. This prompted us to reinvestigate the absolute configurations of known structurally related fungal metabolites, allowing us to conclude that the methylcyclohexene moieties of these natural products have the same absolute configuration despite the variety of configurations of other stereogenic centers. The plausible biosynthetic routes for 1-9 are discussed on the basis of the above conclusion. We propose a Favorskii rearrangement as the key transformation for biosyntheses of 1-4.

Second-Generation Total Synthesis of Prorocentin.

After a recent total synthesis had resolved all issues surrounding the constitution and stereostructure of prorocentin, it was possible to devise a new approach aiming at an improved supply of this scarce marine natural product; this compound is a cometabolite of the prototypical phosphatase inhibitor okadaic acid but still awaits detailed biological profiling. The revised entry starts from 2-deoxy-d-glucose; keys to success were a telescoped hemiacetal reduction/acetal cleavage and an exquisitely selective gold/Brønsted acid-cocatalyzed spiroacetalization.

Triethylamine-Promoted Henry Reaction/Elimination of HNO2/Cyclization Sequence of Functionalized Nitroalkanes and 2-Oxoaldehydes: Diversity-Oriented Synthesis of Oxacycles.

The triethylamine-promoted cascade Henry reaction/elimination of HNO2/cyclization reaction of 2-oxoaldehydes with nitroalkanes bearing various remote functionalities is described. Both chiral and achiral nitroalkanes were applicable to this protocol, leading to a variety of oxacycles, such as chromenes, chromanes, cyclic hemiacetals, and polycyclic acetals. An unexpected regioselective photooxygenation occurred without sensitizer during derivatization to convert a derived diene product into a dioxetane by reaction with singlet oxygen, which provided chromen-2-one and benzaldehyde after fragmentation.

Construction of the Tetracyclic Framework of Sulfur-Containing Discorhabdin-Type Alkaloids.

Herein, we report an efficient synthetic method for constructing the tetracyclic scaffold of sulfur-containing discorhabdin-type alkaloids. The key to success is the BF3•Et2O-promoted dienone-phenol-type rearrangement/sulfur insertion cascade reaction, which converts the common and readily available N,O-acetal-bridged tetracyclic framework to the labile and synthetically challenging N,S-acetal-bridged tetracyclic framework in a single step. Additionally, the hypervalent iodine promoted intramolecular oxidative dearomatization terminated with amide and indium(III) acetate-facilitated radical cyclization were also essential elements in this study.

Ring-Opening Polymerization of Cyclic Acetals: Strategy for both Recyclable and Degradable Materials.

To cope with the severe plastic waste crisis, massive efforts are made to develop sustainable polymer materials whose degradation involves a disposing and decomposing to small molecule (DDM) and/or a chemical recycling to monomer (CRM) process. Polyacetals, a type of pH-responsive polymers, are degradable under acidic conditions, while highly stable under neutral and basic circumstances. As for their synthesis, the cationic ring-opening polymerization (CROP) of cyclic acetals is an elegant and promising approach, though suffering from fatal side reactions and polymerization-depolymerization equilibrium. Recent development in CRM restimulates the interest in the long-forgotten CROP method due to its inherent depolymerization characteristics. In terms of the end-of-life options, polyacetals are recyclable materials with both DDM and CRM potentials. They not only expand the scope of materials for closed-loop recycling but also help to tune the degradation properties of traditional polyesters and polyolefins. This review aims to discuss the synthesis of various polyacetals by CROP and their degradation properties from the perspectives of 1) polymerization of cyclic acetals, dioxepins, and hemiacetal esters, 2) copolymerization of cyclic acetals with heterocyclic or vinyl monomers, and 3) degradation and recycling properties of the related polymers.

p-Toluenesulfonic acid adorned on MCM-41: an efficient and mild catalyst for the regio/chemo-selective hydrolysis of terminal isopropylidene acetals.

Regio/chemo-selective hydrolysis of a 5,6-O-isopropylidene group over a 1,2-O-isopropylidene group is accomplished to obtain corresponding diols in good to excellent yields within 4-5 hours using the p-toluenesulfonic acid impregnated MCM-41 (PTSA-MCM-41) catalyst in acetonitrile and water (9:1, v/v) at room temperature. Other sensitive hydroxyl protecting groups such as naphthyl, toluoyl, pivaloyl, benzoyl, and benzyl are compatible with this methodology. The low cost of the PTSA-MCM-41 catalyst and ease of separation of product from the reaction mixture are significant advantages of this method, which makes it useful in the multigram scale operation.